Our Ford Custom crate engines are all designed with the best combination of power and reliability in mind to suit HP-Street, Oval track speedway racing, Circuit racing, Drag racing, and Marine sport. “What you get” with your Custom Crate Engine is a precision machined, blueprinted and balanced engine using the best components for the level that your engine is designed for, no short cuts, no exceptions. Only available from Port City Engines…
All complete long motors are run-in and tested on our Superflow SF-902 engine dyno before delivery for your complete satisfaction. (Dyno results included)

Ford 347 windsor

HP-1  Performer  series

Base Long engine

Ford 347 windsor engine – 10.2:1-C/R

The Ford 347 windsor HP1 Long engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: High volume oil pump & K&N oil filter .Dyno’d, Run-in and ready to install!

Cubic Inch 347 ci
Bore & Stroke 4.030″ – 3.400″
Horsepower414 hp @ 5800rpm
Torque 418 ft/lbs @ 4500rpm
Recommended Fuel95+ premium unleaded

$9695

F347WHP1-LM
Pricing does not include engine core cost
(change over required)

More Details
Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: New Scat 9000 series crankshaft, balanced and linished.
Con-rods: New Scat I-Beam conrods, balanced.
Heads: Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.
Oil: K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers: New chrome rocker covers.

Base ready to run engine

Ford 347 windsor engine – 10.2:1-C/R

The Ford 347 windsor HP1 Ready2Run engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: High Energy Oil pan, High volume oil pump, Edelbrock performer manifold & Air Filter, Holley 650 carby, MSD Ready2Run distributor, MSD blaster 2 coil, 9mm Eagle leads, Chrome rocker covers, oil cap & breather and a K&N oil filter.

Cubic Inch 347 ci
Bore & Stroke 4.030″ – 3.400″
Horsepower418 hp @ 5800rpm
Torque 414 ft/lbs @ 4500rpm
Recommended Fuel95+ premium unleaded

$12495

F347WHP1-RR
Pricing does not include engine core cost
(change over required)

More Details
Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: New Scat 9000 series crankshaft, balanced and linished.
Con-rods: New Scat I-Beam conrods, balanced.
Heads: Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.
Ignition: Autolite Spark Plugs, MSD Ready2Run distributor, MSD Blaster 2 coil & Eagle 9mm lead set.
Intake: Edelbrock Performer manifold, Edelbrock chrome air filter & Holley 650cfm carb.
Cooling: GMB brand water pump.
Oil: K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers: New chrome rocker covers.

Base Sub engine

Ford 347 windsor engine – 10.2:1-C/R

The Ford 347 windsor HP1 Sub engine includes a fully machined, blueprinted & balanced sub motor.

Including: Camshaft, Lifters, Timing cover, multi keyway timing set, High volume oil pump, K&N oil filter.

Cubic Inch 347 ci
Bore & Stroke 4.030″ – 3.400″
Horsepower418 hp @ 5800rpm
Torque 414 ft/lbs @ 4500rpm
Recommended Fuel95+ premium unleaded

$6595

F347WHP1-SUB
Pricing does not include engine core cost
(change over required)

More Details
Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: New Scat 9000 series crankshaft, balanced and linished.
Con-rods: New Scat I-Beam conrods, balanced.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Train: New lifters & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.

Base short engine

Ford 347 windsor engine – 10.2:1-C/R

The Ford 347 windsor HP1 Sub engine includes a fully machined, blueprinted & balanced short motor.

Including: fully machined block assembled with crankshaft, pistons & rods.

Cubic Inch 347 ci
Bore & Stroke 4.030″ – 3.400″
Horsepower418 hp @ 5800rpm
Torque 414 ft/lbs @ 4500rpm
Recommended Fuel95+ premium unleaded

$5095

F347WHP1-SM
Pricing does not include engine core cost
(change over required)

More Details
Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: New Scat 9000 series crankshaft, balanced and linished.
Con-rods: New Scat I-Beam conrods, balanced.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.

Base engine kit

Ford 347 windsor engine – 10.2:1-C/R

The Ford 347 windsor HP1 engine kit includes a fully machined, blueprinted, & balanced un-assembled short block kit.

Including: Pistons, rings, bearings, gaskets, Scat rods & crankshaft.

Cubic Inch 347ci
Bore & Stroke 4.030″ – 3.400″
Horsepower418 hp @ 5800rpm
Torque 414 ft/lbs @ 4500rpm
Recommended Fuel95+ premium unleaded

$4195

F347WHP1-SK
Pricing does not include engine core cost
(change over required)

More Details
Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: New Scat 9000 series crankshaft, balanced and linished.
Con-rods: New Scat I-Beam conrods, balanced.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.