Our Ford Custom crate engines are all designed with the best combination of power and reliability in mind to suit HP-Street, Oval track speedway racing, Circuit racing, Drag racing, and Marine sport. “What you get” with your Custom Crate Engine is a precision machined, blueprinted and balanced engine using the best components for the level that your engine is designed for, no short cuts, no exceptions. Only available from Port City Engines…
All complete long motors are run-in and tested on our Superflow SF-902 engine dyno before delivery for your complete satisfaction. (Dyno results included)

Ford 302 Windsor

Base Long Engine - 375 HP

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 Windsor HP1 Long engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: High volume oil pump & K&N oil filter

Dyno’d, Run-in and ready to install!

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded

$8415

F302WHP1-LM
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Heads: Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.
Oil: K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers: New chrome rocker covers.

Base Ready to Run Engine - 375 HP

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 Windsor HP1 Ready2Run engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: High Energy Oil pan, High volume oil pump, Edelbrock performer manifold & Air Filter, Holley 650 carby, MSD Ready2Run distributor, MSD blaster 2 coil, 9mm Eagle leads, Chrome rocker covers, oil cap & breather and a K&N oil filter.

Dyno’d, Run-in and ready to install!

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded

$11325

F302WHP1-RR
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Heads: Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.
Ignition: Autolite Spark Plugs, MSD Ready2Run distributor, MSD Blaster SS coil & Eagle 9mm lead set.
Intake: Edelbrock Performer manifold, Edelbrock chrome air filter & Holley 650cfm carb.
Cooling: GMB brand water pump with cast impellor.
Oil: K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers: New chrome rocker covers.

Base Sub Engine - 375 HP

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 Windsor HP1 Sub engine includes a fully machined, blueprinted & balanced sub motor.

Including: Camshaft, Lifters, Timing cover, multi keyway timing set, High volume oil pump, K&N oil filter.

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded
Ford 351c

$5715

F302WHP1-SUB
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Fel-Pro gaskets.
Camshaft: Crow Cams 15603 camshaft.
Lifters: Hydraulic flat tappet.
Valve Train: New lifters & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: High Volume oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.

Base Short Engine - 375 HP

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 Windsor HP1 Sub engine includes a fully machined, blueprinted & balanced short motor.

Including: fully machined block assembled with crankshaft, pistons & rods.

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded

$4345

F302WHP1-SM
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.

Base Engine Kit - 375 HP

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 Windsor HP1 engine kit includes a fully machined, blueprinted, & balanced un-assembled short block kit.

Including: Pistons, rings, bearings, gaskets, Scat rods & crankshaft.

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded

$3295

F302WHP1-SK
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL, King or Clevite bearings.
Gaskets: Durapro or Fel-Pro gaskets.
Fasteners: ARP rod bolts & standard fasteners .
Core Plugs: Brass.

Cylinder Heads

Ford 302 Windsor engine - 10.2:1-C/R

The Ford 302 windsor cylinder heads are a choice of: Brand new Aeroflow aluminium cylinder heads or reconditioned OEM heads cleaned with over size valves and pocket ported.

Cubic Inch 302 ci
Bore & Stroke 4.030″ – 3.000″
Horsepower 375 hp @ 5800rpm
Torque 380 ft/lbs @ 4500rpm
Recommended Fuel 95+ premium unleaded
$1425 OEM Head

$1898 Aeroflow Head

F302WHP1-H
Pricing does not include engine core cost
(change over required)

Heads: Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.