Our Holden Custom crate engines are all designed with the best combination of power and reliability in mind to suit HP-Street, Oval track speedway racing, Circuit racing, Drag racing, and Marine sport. “What you get” with your Custom Crate Engine is a precision machined, blueprinted and balanced engine using the best components for the level that your engine is designed for, no short cuts, no exceptions. Only available from Port City Engines…
All complete long motors are run-in and tested on our Superflow SF-902 engine dyno before delivery for your complete satisfaction. (Dyno results included)

Holden 3.8 V6

HP-5 Custom Series

Base Long Engine -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden 3.8L V6 wingless sprint long engine includes a fully machined, blueprinted & balanced long motor .

Including: AWSR spec heads with new valves.

Dyno’d, Run-in and ready to install!

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$8025

CH3.8LHP5W-LM
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Heads: Cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined to class rules and assembled with new valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL race series.
Gaskets: Durapro gaskets.
Camshaft: Crow Cams 774000 Hydraulic roller camshaft.
Lifters: Hydraulic roller lifters.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: Overhauled oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & Head studs.
Core Plugs: Brass.
Ignition: Autolite Spark Plugs & Eagle 9mm lead set.
Cooling: GMB brand water pump.
Oil: K&N Z154 oil filter, Tritech Lubricants running in oil.

Base Ready to Run Engine -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden 3.8L V6 wingless sprint long engine includes a fully machined, blueprinted & balanced long motor .

Including: New coils, Wingless sprint manifold, throttle body, injectors, low steel sump and custom tune.

Dyno’d, Run-in and ready to install!

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$

CH3.8LHP5W-RR
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Heads: Cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined to class rules and assembled with new valve springs, retainers, collets and corrected spring pressures.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL race series.
Gaskets: Durapro gaskets.
Camshaft: Crow Cams 774000 Hydraulic roller camshaft.
Lifters: Hydraulic roller lifters.
Valve Springs: Crow Cams performance springs.
Valve Train: New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: Overhauled oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts & Head studs.
Core Plugs: Brass.
Ignition: Autolite Spark Plugs & Eagle 9mm lead set.
Cooling: GMB brand water pump.
Oil: K&N Z154 oil filter, Tritech Lubricants running in oil.

Base Sub Engine -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden 3.8L V6 wingless sprint long engine includes a fully machined, blueprinted & balanced sub motor.

Including: Camshaft, Lifters, Timing cover, multi keyway timing set, K&N oil filter, harmonic balancer and flexplate.

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$4945

CH3.8LHP5W-SUB
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL race series.
Gaskets: Durapro gaskets.
Camshaft: Crow Cams 774000 Hydraulic roller camshaft.
Lifters: Hydraulic roller lifters.
Valve Train: New lifters & timing set.
Timing Set: Crow double row roller chain with new cnc gears.
Oil Pump: Overhauled oil pump.
Balancer: Nuline/Powerbond balancer.
Fasteners: ARP rod bolts.
Core Plugs: Brass.
Cooling: GMB brand water pump.
Oil: K&N Z154 oil filter, Tritech Lubricants running in oil.

Base Short Engine -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden 3.8L V6 wingless sprint long engine includes a fully machined, blueprinted & balanced un-assembled short engine.

Including: Pistons, rings, bearings, Durapro gaskets.

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$

CH3.8LHP5W-SM
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL race series.
Fasteners: ARP rod bolts.
Core Plugs: Brass.

Base Engine Kit -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden 3.8L V6 wingless sprint long engine includes a fully machined, blueprinted & balanced un-assembled short engine.

Including: Pistons, rings, bearings, Durapro gaskets.

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$2816

CH3.8LHP5W-SK
Pricing does not include engine core cost
(change over required)

Block: Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft: OEM crankshaft, Hot tank cleaned, Crack tested, Ground, balanced and linished.
Con-rods: OEM conrods, Re-Sized and balanced with new ARP bolts.
Pistons: Hypereutectic pistons.
Rings: Hastings or Sealed Power moly rings.
Bearings: ACL race series.
Gaskets: Durapro gaskets.
Fasteners: ARP rod bolts.
Core Plugs: Brass.

Cylinder Heads -220 HP

Holden V6 engine - 9.45:1-C/R

The Holden V6 wingless sprint cylinder heads are reconditioned OEM heads machined to suit the class rules.

Including: Pistons, rings, bearings, Durapro gaskets.

Cubic Inch 234 ci
Bore & Stroke 3.820″ – 3.400″
Horsepower 220 hp @ 5100rpm
Torque 271 ft/lbs @ 3000rpm
Recommended Fuel Methanol

$

CH3.8LHP5W-H
Pricing does not include engine core cost
(change over required)

Heads: OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced and cc’d to meet 9.5:1 comp rule, valve seats machined to suit class rules, new valve springs, retainers, collets and corrected spring pressures.